Water wells of large diameter & depth
Irrigation, water-supply and industrial wells in Karditsa, Larissa, Trikala, Volos and all of Greece — from study to delivery, then supervision, maintenance and cleaning. Depth up to 400 m, diameter up to Ø24″.
Why a well
Your own water — the cheapest solution
With modern drilling technology, more and more farms and businesses turn to groundwater for irrigation and supply — the easiest and most economical long-term solution. A properly built well saves drinking and irrigation water and can feed fire-protection tanks, supporting the fire service's work.
In water-supply wells we seal off contaminated surface water with conductor casing and pressure cementing — clean water from the deeper aquifers.
TECHNICAL SPECS
- Drilling depthup to 400 m
- Diameterup to Ø24″
- Mud circulationdirect + reverse
- Test pumpingown pump set
- Experiencesince 1980
Study — Process — Construction
How we build a well that lasts decades
01 · LOCATING THE AQUIFER
- Subsoil study via substrate density
- Satellite thermal imaging
- IGME geological maps
- Site selection, machine access, refuelling plan and budget
02 · DRILLING & WELL LOG
- Rock sampling while drilling for an accurate well log
- Correct placement of screens and blank casing
- Straightness and verticality — a long-lived well
- Gravel pack between casing and formation
03 · CLEANING & PUMPING
- Air-lift cleaning to open up the aquifer layers
- Test pumping with our own pump set
- Measuring yield, water quality and water level
- Sizing the final pump set from the results
Completion time depends on the depth and diameter of the well, the difficulty and hardness of the subsoil. After a site visit we give a clear schedule and budget.
Pump set
The right equipment, the lowest consumption
We select the pump set from the test-pumping results and your needs. Correct sizing and installation by an experienced crew gives the pump a long life at the lowest possible energy cost.
- Submersible pump sized to the project
- Electrical panel with full protections
- Float switch and all required fittings
Sampling — Geotechnical
Sampling boreholes
We take core, split-spoon and undisturbed samples with dedicated rigs and send them to a soil laboratory — the basis of the technical study. An essential step for foundations, major works and route investigations.
Who we drill for
Irrigation
For farms and large crops of the Thessalian plain.
Water supply
For municipalities and communities — with surface-water isolation.
Industrial
For bottling, food and production plants with high-yield needs.
Investigation
For engineering firms — sampling and geotechnical data.